The flare tee is highly dependable and an economical choice of fitting for fluid and air transmission within multiple application including heating and other industrial markets. This all brass fitting features a vibration-resistant construction. It resists mechanical pull-out and is designed for high pressure service. The temperature range is -65 to 250 deg F.
BrassCraft® Tube Tee, 44 Series, Tee Fitting, 5/8 in Connection Size 1, Connection Type 1: Flared, 5/8 in Connection Size 2, Connection Type 2: Flared, Connection Size 3: 5/8 in, Connection Type 3: Flared, Flared|Flared|Flared Connection, Brass, Material Construction: Brass, Finish: Rough, 5/8 in Tube OD, 600 to 3000 psi, -65 to 250 deg F
| Connection Size 1 | : | 5/8 in |
| Connection Size 2 | : | 5/8 in |
| Connection Size 3 | : | 5/8 in |
| Connection Type 1 | : | Flared |
| Connection Type 2 | : | Flared |
| Connection Type 3 | : | Flared |
| Connection Type | : | Flared|Flared|Flared |
| Finish | : | Rough |
| Fitting Type | : | Tee |
| Material Construction | : | Brass |
| Material | : | Brass |
| Pressure Rating | : | 600 to 3000 psi |
| Series | : | 44 Series |
| Temperature Rating | : | -65 to 250 deg F |
| Tube OD | : | 5/8 in |
- Designed for use with aluminum, copper, brass and welded steel tubing that can be flared
- Designed for use with fuel, oil, liquefied petroleum (LP) and natural gas lines
- Recommended for higher pressures than those covered by compression fittings
- Resists mechanical pull-out
- May be used in both indoors and outdoors
Instruction/Installation Manual