Oatey® orange lava CPVC cut-in cement is a single step, fast curing cement is recommended for pressure, potable water cut-in, repair applications. Designed for cut-in applications where downtime is limited, it sets the fastest, eliminating the need for bracing. Because it quickly melts pipe surface to weld the joint, primer is not required. It also applies easily with included in lid dauber. This orange, low VOC, medium bodied, fast setting cement can be used to solvent weld CPVC pipe and fittings up to 6 in Dia with interference fit.
Oatey® Lava Cement, 8 oz Net Content, Composition: Furan, Tetrahydro, Ethene, Chloro-, Homopolymer, Chlorinated, Acetone, Silica, Amorphous, Fumed, Liquid Form, Orange, Solvent Odor/Scent, 0.97 Specific Gravity, <490 g/L VOC, 500 to 1500 cPs Viscosity, 2.5 Vapor Density, 145 mmHg Vapor Pressure, 180 psi, Applicable Materials: Bristle Brush, Roller, Flammability Limit: 3, Evaporation Rate: 5.5 to 8 %, 110 deg F
| Applicable Materials | : | Bristle Brush, Roller |
| Color | : | Orange |
| Composition | : | Furan, Tetrahydro, Ethene, Chloro-, Homopolymer, Chlorinated, Acetone, Silica, Amorphous, Fumed |
| Evaporation Rate | : | 5.5 to 8 % |
| Flammability Limit | : | 3 |
| Form | : | Liquid |
| Net Content | : | 8 oz |
| Odor/Scent | : | Solvent |
| Pressure Rating | : | 180 psi |
| Specific Gravity | : | 0.97 |
| Temperature Rating | : | 110 deg F |
| VOC Content | : | <490 g/L |
| Vapor Density | : | 2.5 |
| Vapor Pressure | : | 145 mmHg |
| Viscosity | : | 500 to 1500 cPs |
- One-step orange cement with dauber primes and solvent welds CPVC
- Fast set for pressure, potable water cut-in, repair applications
- Quickly melts pipe surface to weld the joint, primer not required
- Can be used on CPVC pipe and fittings up to 6 in Dia with interference fit
- For commercial hot and cold water systems up to 200 deg F and including FlowGuard Gold and Corzan CPVC piping systems
- Designed for cut-in applications where available downtime is limited
Instruction/Installation Manual
Video Link