The flare female reducing adapter is highly dependable and an economical choice of fitting for fluid and air transmission within multiple application including heating and other industrial markets. This all brass fitting features a vibration-resistant construction. It resists mechanical pull-out and is designed for high pressure service.
BrassCraft® Reducing Tube Adapter, 46 Series, Adapter Fitting, 3/8 in Connection Size 1, Connection Type 1: Flared, 3/4 in Connection Size 2, Connection Type 2: FIP, Flared|FIP Connection, Brass, Material Construction: Brass, Finish: Rough, 5/8-18 Thread, 1-1/8 in Hex, 3/8 in Tube OD, 1.39 in L, 600 to 3000 psi, -65 to 250 deg F
| Connection Size 1 | : | 3/8 in |
| Connection Size 2 | : | 3/4 in |
| Connection Type 1 | : | Flared |
| Connection Type 2 | : | FIP |
| Connection Type | : | Flared|FIP |
| Dimensions | : | 1.39 in L |
| Finish | : | Rough |
| Fitting Type | : | Adapter |
| Hex Size | : | 1-1/8 in |
| Material Construction | : | Brass |
| Material | : | Brass |
| Pressure Rating | : | 600 to 3000 psi |
| Series | : | 46 Series |
| Temperature Rating | : | -65 to 250 deg F |
| Thread Size | : | 5/8-18 |
| Tube OD | : | 3/8 in |
- One-piece brass body provides strength, durability and longer lasting performance
- Designed for use with aluminum, copper, brass and welded steel tubing that can be flared
- Designed for use with fuel, oil, liquefied petroleum (LP) and natural gas lines
- Flare fitting resists mechanical pull-out
- Recommended for higher pressures than those covered by compression fittings
- Reusable with long or short nuts
- For indoor use
Instruction/Installation Manual