Oatey® galvanized base no caulk roof flashings can be used in commercial and residential applications where a watertight seal for roof penetrations around the plumbing vent pipe is required.
Oatey® Roof Flashing, 14-1/2 in Base Length, 11 in Base Width, Material Gauge: 29 ga, Steel, Finish: Galvanized, 40 deg Roof Pitch, Fits Vent Pipe Size: 3 in
| Base Length | : | 14-1/2 in |
| Base Width | : | 11 in |
| Finish | : | Galvanized |
| Fits Vent Pipe Size | : | 3 in |
| Material Gauge | : | 29 ga |
| Material | : | Steel |
| Roof Pitch | : | 40 deg |
- Roof flashing slides over DWV pipe for pitch to 40 deg
- Made of rust-proof, stamped 29 ga galvanized steel
- Non-fading sealing collar
- Approved for type B installation
- Not for hot mopped or built-up roofs
- Do not use paint or petroleum based products on rubber collars
- Self-sealing collar slides over pipe and requires no caulking
- Metal base for pitch from 0 to 40 deg or up to 10/12 roof
- Rated 180 deg F continuous heat and Approved for type B installation
Catalog